The Hollow is a beautifully geometric and transitional lever. An heirloom quality piece of art for your door. Discover this distinctive line of sandcast brass door levers by MATUREWARE. An architectural hardware product line produced by FUTAGAMI in Toyoma, Japan.
The handles are available in 4 shapes (Hex/ Curved/ Line/ Hollow) with 3 interchangeable back plate options (Hex/ Circle/ Square).
Lever Handle (handle only):
L 133 mm (5.2″) X H 19 mm (0.7″) X D 48 mm (1.9″)
Square: W 57mm (2.2”) X H 57mm (2.2”)
Hexagon: W 57mm (2.2”) x H 66mm (2.6”)
Circle: Ø 57 mm (2.2″)
Standard Set includes:
– Lever handle
– Mortise lock kit
– Brass minus screws
* The mortise lock kit does not come with a lock
mechanism cylinder. If you need a lock such as for a
bathroom, you will need to purchase the latches separately.
–Corresponding latches are available separately Brass Latch Flat or Brass Latch Corner for light locking / privacy.
– These levers are designed for wood and wood composite doors only. For installation, the minimum door thickness is 33mm (1 5/16″). The measurement of the backset is 63.5mm (2 1/2″). Professional installation is recommended.
Areas of application: Light-duty Commercial, Residential
Solid cast brass
Note: materials are not lacquered and will age and oxidize over time. Refer to our care guide for best practices.
NOTE: European roses are smaller than standard North American models. Please ensure all dimensions are carefully reviewed as these may not fit existing or pre-bored door holes.
Matureware Lever and Latches Brochure
Hollow Lever Product Sheet
Matureware Back Plates Product Sheet
Matureware Mortise Lock Product Sheet